Onkyo HT-S3300 Manual do Utilizador

5.1ch Home Theater SystemHT-S3300AV Receiver (HT-R380)Speaker Package (HTP-380)Front Speakers (SKF-380 L/R)Center Speaker (SKC-380/SKC-380C)Surround S

10EnRemote ControllerFor detailed information, see the pages in parentheses.a ON/STANDBY button (➔ 20)b REMOTE MODE/INPUT SELECTOR buttons (➔ 21, 44 t

11EnAbout Home TheaterYou can use two sets of speakers with the AV receiver: Speakers A and Speakers B.Speakers A should be used in your main listenin

12EnConnecting the AV ReceiverSpeaker ConfigurationThe following table indicates the channels you should use depending on the number of speakers that

13EnConnecting the Speaker CablesScrew-type speaker terminalsUsing Banana Plugs (North American models)• If you are using banana plugs, tighten the sp

14EnThe speakers can easily be wall mounted by using the key-hole slots. To prevent the speaker from vibrating against the wall, attach two of the sup

15EnConnected image with AV components• Before making any AV connections, read the manuals supplied with your AV components.• Don’t connect the power

16EnConnect your components to the appropriate jacks. The default input assignments are shown below.✔: Assignment can be changed (➔ 31).Refer to “Abou

17EnConnect your components to the appropriate jacks. The default input assignments are shown below.✔: Assignment can be changed (➔ 31). How to recor

18EnWith u (Remote Interactive), you can use the following special functions: System On/Auto Power OnWhen you start playback on a component connected

19EnThe AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the

2EnImportant Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use th

20En Turning On/Off the AV ReceiverTurning OnPress ON/STANDBY on the front panel. orPress RECEIVER followed by ON/STANDBY on the remote controll

21EnBasic Operations Operating on the AV receiver Operating with the remote controllerNote• The maximum master volume level is affected by the subwo

22EnYou can temporarily mute the output of the AV receiver.Tip• To unmute, press MUTING again or adjust the volume.• The Mute function is cancelled wh

23EnListening to the RadioWith the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick se

24EnYou can store a combination of up to 40 of your favorite FM/AM radio stations as presets.Selecting PresetsTip• You can also use the remote control

25EnFinding Stations by Type (PTY)You can search for radio stations by type.Listening to Traffic News (TP)You can search for stations that broadcast t

26EnRecordingThis section explains how to record the selected input source to a component with recording capability, and how to record audio and video

27EnUsing the Listening ModesSee “About Listening Modes” for detailed information about the listening modes (➔ 27).Listening Mode ButtonsMOVIE/TV butt

28En Speaker LayoutThe illustration shows which speakers are activated in each channel. See “Sp Config (Speaker Configuration)” for the speaker setup

29EnOnkyo-Original DSP Listening ModesNote*1For the Blu-ray Discs, Dolby Digital is used.*2AV receiver can input the DSD signal from HDMI IN. Setting

3EnPrecautions1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyri

30En Advanced SetupNoteThe on-screen setup menus are displayed when:• There is no video input, or• The video input is 480p, 576p, 720p, 1080i, or 1080

31EnExplanatory NotesMenu HDMI InputIf you connect a video component to an HDMI input, you must assign that input to an input selector. For example, i

32EnNote• When an HDMI IN is assigned to an input selector in “HDMI Input” (➔ 31), this input assignment is automatically set to the same HDMI IN. And

33En Left, Center, Right, Surround Right, Surround Left, Subwoofer` Specify the distance from the each speaker to your lis-tening position.Note• The

34EnDTS SettingNeo:6 Music Center Image` 0 to 2 to 5With this setting, you can specify by how much the front left and right channel output is attenua

35EnTheater-Dimensional Setting Listening Angle` Wide:Select if the listening angle is 40 degrees.` Narrow:Select if the listening angle is 20 degree

36En AM Freq Step (Asian models)` 10kHz:Select if 10 kHz steps are used in your area.` 9kHz:Select if 9 kHz steps are used in your area.Menu HDMI Set

37EnNote•The “Power Control” setting can be set only when the above “HDMI Control” setting is set to “On”.• HDMI power control only works with p-compa

38EnAudyssey Settings Dynamic EQ Dynamic VolumeSee “Dynamic EQ” and “Dynamic Volume” of “Audio Adjust” (➔ 34).EX.BASSEX.BASS is a technology that ha

39EnAudio SelectorYou can set priorities of audio output when there are both digital and analog inputs. AudioSel` ARC:The audio signal from your TV t

4EnSpeaker PrecautionsPlacement• The subwoofer cabinet is made out of wood and is there-fore sensitive to extreme temperatures and humidity, do not pu

40En Controlling iPodModels sold are different depending on the region.Connecting an Onkyo Dock No. Onkyo Dock Cable Note PageAUP-A1 Dock(Univer

41EnUP-A1 DockWith the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great so

42EnNote• Enter the appropriate remote control code before using the AV receiver’s remote controller for the first time (➔ 44).• Connect the RI Dock t

43En✔: Available buttonsNote• With some iPod models and generations, certain buttons may not work as expected.• For detailed operation of the iPod, pl

44EnControlling Other ComponentsYou can use the AV receiver’s remote controller (RC-762M) to control your other AV components. This section explains h

45EnIf you want to control an Onkyo component by pointing the remote controller directly at it, use the following remote control codes:` 32900: Onkyo

46EnNote• With some components, certain buttons may not work as expected, and some may not work at all.✔: Available buttons*1The p function is not sup

47EnTroubleshootingIf you have any trouble using the AV receiver, look for a solution in this section. If you can’t resolve the issue your-self, conta

48En Only the front speakers produce sound Only the center speaker produces sound The surround speakers produce no sound The center speaker produc

49En There’s no picture from a source connected to an HDMI IN The on-screen menus don’t appear Reception is noisy, FM stereo reception is noisy, or

5EnInstalling the BatteriesNote• If the remote controller doesn’t work reliably, try replacing the batteries.• Don’t mix new and old batteries or diff

50En The AV receiver unexpectedly selects your iPod as the input source Can’t record The sound changes when I connect my headphones How do I chang

51EnSpecificationsAmplifier SectionVideo SectionTuner SectionGeneral HDMI Video Inputs Video Outputs Audio Inputs Audio Outputs OthersSpecificat

52EnPassive Subwoofer (SKW-380)Front Speaker (SKF-380)(North American) Center Speaker (SKC-380)(Asian) Center Speaker (SKC-380C)Surround Speaker (SKR-

53EnAbout HDMIDesigned to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard fo

54EnUsing an RIHD-compatible TV, Player, or Recorderp, which stands for Remote Interactive over HDMI, is the name of the system control function found

55En How to connect and setup1Confirm the connecting and setting.1. Connect the HDMI OUT jack to the HDMI input jack of the TV.2. Connect the audio o

SN 29400204Y1001-1(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.* 2 9 4 0 0 2 0 4 *Sales & Product Planning Di

6EnFeaturesAV Receiver HT-R380• 110 Watts/Channel @ 6 ohms• 120 Watts/Channel @ 6 ohms (JEITA)• Optimum Gain Volume Circuitry• H.C.P.S. (High Current

7EnFront & Rear PanelsThe actual front panel has various logos printed on it. They are not shown here for clarity.The page numbers in parentheses

8EnFor detailed information, see the pages in parentheses.a A and B speaker indicators (➔ 11, 22)b Audio input indicatorsc Listening mode and format i

9EnSpeaker Packagea Speaker terminalsThese push terminals are for connecting the speaker to the HT-R380 with the supplied speaker cables.The supplied